Resources

Digital Dentures - Scanning Process


 

Post Curing Material Settings 

  pro3dure CD-2 Otoflash G171 ASIGA Flash
GR-10 guide 4 min* 2 x 750** n/a
GR-11 tray 4 min* 2 x 750** n/a
GR-12 cast 4 min* 2 x 750** 2 x 25 min
GR-13 model 4 min* 2 x 750** 2 x 10  min
GR-15 gingiva 4 min* 2 x 1,250** 2 x 5 min
GR-16 Xray 4 min* 2 x 750** n/a
GR-17.1 temp 10 min* 2 x 2,500** n/a
GR-18.1 IB 10 min* 2 x 1,250** n/a
GR-19 OA 4 min* 2 x 750** n/a
GR-20 MJF 4 min* 2 x 750** n/a

* For all parameters, 10 seconds “Pregas Time” and 10 seconds “Gas (irradiation)” as well as Ramp = 0 apply.
** With UV-B filter type 360N2 (transparent 360-700 nm) - Flashes (after half the exposure, please turn the parts.)

  

CD-2 Curing Unit

Connection & Nitrogen Gas (not included, purchase separately):

  • Click here for 1/4 in. O.D. x 0.170 in. I.D. x 25 ft. Natural Polyethylene Tubing.
  • Click here for 1/4 in. I.D. x 7/16 in. O.D. x 10 ft. Clear Braided Vinyl Tubing.
  • Click here for 1/4 in. - 5/8 in. Stainless Steel Hose Clamps (10-Pack)
  • Click here for a popular source to buy Nitrogen Gas.

 

 

Print Profiles for Asiga MAX & PRO 4K:

Instructions for downloading print-files to composer: Click here!


THERMEO

  • Where* to buy non-alcohol based cleaning agent? Click here!

 

Free Software Downloads

  • Case Connect Center from Dentsply Sirona.
  • BlueSkyBio Case Planning Software.
  • MeshMixer: Do you need to clean up a 3D scan, do some 3D printing, or design an object that fits something else? Meshmixer can help. Think of it as a sort of "Swiss Army Knife" for 3D meshes.
  • 3D Slicer is a free and open source software platform for medical image informatics, image processing, and three-dimensional visualization.