SKU:
Aidite Cameo Glass Ceramic CAD/CAM Blocks
- In stock, ready to ship
- Backordered, shipping soon
Glass ceramic blocks for efficient chairside and lab all-ceramic restorations.
Aidite cameo Dental Glass Ceramic is a CAD/CAM block for chairside and lab all-ceramic restorations. According to Aidite, it is easy to mill, and its crystallization process takes only about 20 minutes.
The production process is precisely matched to CAD/CAM systems for efficient, instant restorations, with good transparency for a natural-looking result.

The essential details at a glance.
Specifications
| Item | Detail |
|---|---|
| Shades | VITA 16 (A1–A4, B1–B4, C1–C4, D2–D4) and 4 bleach shades (BL1, BL2, BL3, BL4) |
| Translucency | HT (high transparency), LT (low transparency) |
| Block size | 18 x 13 x 15 mm |
| Package | Package of 5 blocks |
| Mandrels | Several mandrel types are available to fit a range of milling machines |
Physical properties
| Property | Value |
|---|---|
| Coefficient of thermal expansion (25–500 °C) | 10.5 ± 0.5 x 10-6/K |
| Three-point bending strength | 400 ± 60 MPa |
| Chemical solubility | ≤ 40 µg/cm² |
| Density | 2.47 ± 0.05 g/cm³ |
Values are from Aidite's product brochure. Follow the manufacturer's current Instructions for Use for each case.
Strength, fit, and a fast digital workflow.
400 ± 60 MPa bending strength
Aidite says this allows the CAD/CAM system to design with higher accuracy, makes ultra-thin veneers and other restorations easier to process, and improves the strength and safety of the seated restoration.
Stable edges, accurate structure
Aidite says the nano-micron crystallization structure gives better edge stability and structural accuracy during milling. This simplifies repeated seating and polishing and helps restorations fit efficiently.
Hardness close to natural teeth
Aidite says cameo glass ceramic is closer in hardness to natural teeth than other material types. This can reduce excessive wear on the opposing teeth caused by a hardness difference and limit abrasion of the restoration and neighboring teeth.
Near-zero shrinkage
An all-ceramic material with a shrinkage ratio close to zero, for efficient design and digital processing combined with a rapid crystallization process.
See the material and restoration characteristics.



Choose HT or LT based on the case.
High transparency
Good light transmission that restores the color and texture of the natural abutment.
Low transparency
Lower light transmission for masking.
Indicated all-ceramic restorations.
According to Aidite's product brochure, cameo glass ceramic is indicated for:
Standard and fast crystallization.
Reference programs from Aidite's product brochure.
Standard crystallization
| Start temp | Drying time | Heating rate | Highest temp | Holding time | Final temp |
|---|---|---|---|---|---|
| 450 °C | 4 min | 40 °C/min | 840 °C | 2 or 6 min | 500 °C |
Fast crystallization
| Start temp | Drying time | Heating rate | Temp | Holding time | Heating rate | Highest temp | Holding time | Final temp |
|---|---|---|---|---|---|---|---|---|
| 403 °C | 18 s | 90 °C/min | 820 °C | 10 s | 30 °C/min | 840 °C | 2 or 6 min | 700 °C |
Reference values from Aidite's product brochure. Confirm the current Instructions for Use and validate the program for your furnace. Tables scroll sideways on small screens.
Finish glass ceramic restorations with greater control.
Stain & Glaze
Explore finishing materials for characterization, value control, surface refinement, and the final glazed restoration.
Shop stain and glaze products →Choose the shade, translucency, and package quantity above.
Aidite cameo glass ceramic gives dental labs and chairside teams a fast-crystallizing CAD/CAM option for veneers, inlays, onlays, crowns, and full crown bridges.
Product Questions
Frequently Asked Questions
Helpful information about Aidite Cameo Glass Ceramic CAD/CAM Blocks, its intended use, and the recommended workflow.
01 What is Aidite cameo Glass Ceramic?
Aidite cameo Dental Glass Ceramic is a CAD/CAM block for chairside and lab all-ceramic restorations. According to Aidite, it is easy to mill, and its crystallization process takes only about 20 minutes.
02 What restorations is Aidite cameo Glass Ceramic indicated for?
According to Aidite's product brochure, cameo glass ceramic is indicated for veneers, inlays, onlays, anterior crowns, posterior crowns, and full crown bridges. Follow the manufacturer's current Instructions for Use and the clinician's case-specific requirements.
03 How strong is Aidite cameo Glass Ceramic?
Aidite's product brochure lists a three-point bending strength of 400 ± 60 MPa. Strength values should be interpreted according to the specific test method and current manufacturer documentation.
04 Does Aidite cameo Glass Ceramic require crystallization?
Yes. Aidite's product brochure provides both a standard and a fast crystallization program, and Aidite describes the crystallization process as taking about 20 minutes. Confirm the current Instructions for Use and validate the program for your furnace.
05 How do I choose between HT and LT?
Choose HT (high transparency) when you want good light transmission that restores the color and texture of the natural abutment. Choose LT (low transparency) when lower light transmission is needed for masking.
06 Which shades are available?
Aidite cameo is available in 20 shades: VITA 16 (A1–A4, B1–B4, C1–C4, D2–D4) and 4 bleach shades (BL1–BL4), each in HT and LT.
07 What comes in each package?
Each package contains five 18 x 13 x 15 mm CAD/CAM blocks in the selected shade and translucency. You can order 1 package, 2 packages (10 blocks), or 5 packages (25 blocks) at a lower price per package.
08 How fast do orders ship?
In-stock orders placed before 4 PM ET ship the same business day, with FREE shipping and no handling fees.