Aidite REF: MB3304G
Aidite AMW-400 & AMM-520 Pro Glass Ceramic Milling Burs
Glass · 6 mm Shank
- In stock, ready to ship
- Backordered, shipping soon
Precision burs for glass-ceramic milling.
Glass-ceramic milling burs for the Aidite AMW-400 and AMM-520 Pro, available in the essential tool sizes for accurate and dependable wet-milling workflows.
Designed for Aidite wet-milling workflows
| Bur Size | Aidite REF | Material |
|---|---|---|
| 0.6 mm | MB3304G | Glass Ceramic |
| 1.0 mm | MB3305G | Glass Ceramic |
| 2.5 mm | MB3306G | Glass Ceramic |
The right tool for precise glass-ceramic milling.
Choosing your bur
Select the bur diameter required by your milling strategy and machine configuration. Always follow the milling machine manufacturer's recommended tool positions, machining strategy, and replacement intervals.
From milling to finishing.
Pair your Aidite glass-ceramic milling burs with restorative materials and finishing solutions selected for today's digital dental laboratory workflow.
Product Questions
Frequently Asked Questions
Helpful information about Aidite AMW-400 & AMM-520 Pro Glass Ceramic Milling Burs, its intended use, and the recommended workflow.
01 Which milling machines are these glass-ceramic burs compatible with?
These glass-ceramic milling burs are intended for compatible Aidite AMW-400 and Aidite AMM-520 Pro wet-milling workflows. Always verify the required bur size, tool position, and CAM strategy for your specific machine configuration.
02 What bur sizes are available?
The available glass-ceramic milling bur sizes are 0.6 mm, 1.0 mm, and 2.5 mm.
03 What are the Aidite reference numbers for these burs?
The Aidite reference numbers are MB3304G for the 0.6 mm bur, MB3305G for the 1.0 mm bur, and MB3306G for the 2.5 mm bur.
04 What materials are these milling burs designed for?
These burs are designed for compatible glass-ceramic wet-milling workflows. Follow the milling machine and material manufacturer's recommendations for tool selection and machining parameters.
05 Can these burs be used for Aidite cameo KrystaFree CAD/CAM blocks?
They may be used within compatible Aidite glass-ceramic milling workflows when the machine, CAM strategy, and material indications call for these specific tool sizes. Verify the recommended milling strategy before use.
06 Can these burs be used for XTCERA glass ceramic?
They can be considered for compatible wet-milling workflows using XTCERA glass-ceramic blocks when the selected CAM strategy and machine configuration specify the corresponding bur sizes. Always follow the applicable material and machine instructions.
07 How do I choose the correct milling bur size?
Select the bur size specified by your CAM milling strategy and the tool position assigned by your Aidite milling machine. Do not substitute bur sizes unless permitted by the machine and CAM manufacturer's instructions.
08 How often should glass-ceramic milling burs be replaced?
Replacement intervals depend on material, milling volume, machining strategy, and tool wear. Follow Aidite's recommended tool-life guidance and replace burs when the machine or CAM system indicates replacement or when milling performance begins to deteriorate.
09 Why is proper bur condition important when milling glass ceramic?
Using the correct bur in good condition helps support consistent machining, accurate detail reproduction, and predictable milling performance. Worn or damaged burs can negatively affect the milling process.
10 What other products can I use in a glass-ceramic workflow?
Gro3X also offers Aidite cameo KrystaFree CAD/CAM blocks, XTCERA Glass Ceramic blocks, and the Wagner SRS Sprue Removal System for complementary glass-ceramic milling and finishing workflows.
